In the world of polyethylene (PE) piping systems we can found what, the experts, calls: “System Standard”. This term is used to individuate a series of different standards (or norms) under the

CEN experts in polyethylene piping system have been hosted for two days of work in Brolo, Sicily. This has been the first meeting Face-to-Face after the era “covid”. The experts, from different European

Plastitalia releases the “Plast App” for Android (https://play.google.com/store/apps/details?id=com.app_plastitalia.app&gl=IT) and iOS (https://apps.apple.com/it/app/plast/id6443774811). The aim of this App is to provide technical support to the operators and engineers that have to quantify and or qualify the work to

First Italian factory to publish an Environmental Product Declaration (EPD) dedicated only to hdpe fittings, another achievement to be associated to “Plastitalia S.p.A.” It is clear to everyone that the human being has,

It is considered to be the main swimming facility in Italy: The Foro Italico swimming complex, located between Monte Mario and the Tiber River, in Rome, in a few days

Another tile has been added to Plastitalia S.p.A. proposal in the field of firefighting application. Under request are now available steel flanges marked FM. This is an important improvement that complete the range

Plastitalia is a leading company in the field of plastic manufacturing and this fact implies that the factory is completed with a never ending list of equipment and among them

This document specifies the method of testing the knowledge and skill of a welder who is required to carry out welds on thermoplastics in new constructions and repair work. The

The mechanical joining procedure using flanges implies the evaluation of many variables that must be considered in order to obtain areliable joint over time. Forthis reason, this procedure is considered a “special process” from

An electro-fusion saddle incorporates a coil through which the electric current is made to pass for the purpose of generating heat up to the point in which the polyethylene, which is near

We are very excited to introduce you our new entry: the dn1600 SDR26 Pn6 Coupler. The coupler is manufactured by a Negri Bossi VH3500 injection moulding machine with a 35000 kN clamping force; the

Polyethylene is a material that offers a valid economical and technical solution in a broad range of applications for the transport of pressurised and non-pressurised fluids. A polyethylene pipe, in order to

One of the essential welding procedures is the electrofusion welding. The welding principle is the same in all the cases; the surfaces that need to be welded are heated to a certain temperature, such

Thanks to a long experience in manufacturing electrofusion fittings, Plastitalia SpA has been able to design a control unit that can meet the needs of the market. Plastitalia allows you to choose between

Fire protection systems for industrial plants usually require that all components have Factory Mutual Research Corporation (FM) approval. Factory Mutual Research Corporation (FM) is a testing laboratory that is recognized in the USA

As part of the Plastitalia’s quality commitment the testing laboratory unroll one of the most important activity that run every day, no matter if the sun sunshine in the sky or if

The European Parliament has approved in the plenary session hold the 15 December the revision text of Drinking Water Directive. This new version will be effective 20 day after its publication

Here again Plastitalia S.p.A. is on the top of the world with his PN25 line of electrofusion couplers. During last months a testing campaign has been launched and with the help

These meetings took place during the first week of February and saw a wide and interested participation. During these events, many technical questions related both to the electro-fusion process and

An article that traces the history of our company and our president, as well as founder, Nino Lenzo; the results obtained and the most significant events. We are proud to

Tante le novità: implementata la gamma dei prodotti con l’inserimento di nuovi diametri; introdotti nuovi articoli, come ad esempio puddle flange o integral flange; inseriti nuovi attrezzi: raschiatore meccanico, allineatore

This exhibition is considered the reference event for the construction industry in the Middle East, South-East Asia and some East-Africa countries. Plastitalia is waiting for you at the Plastitalia awaits you

The event will take place on Sunday 22 September, in San Marco d’Alunzio (Me), at 8:30 pm. After the film showing, the audience will be able to meet the director

The event will include workshops and conferences that will bring together the main national and international experts, authorities and business leaders, who will discuss the various issues concerning the mining

With this certificate Plastitalia aim to be one of the first company, in Europe, to achieve this exclusive goal.

This standard sets rules for organizations involved in the welding of plastics pipeline and/or components (e.g.: fabricated bends, etc.). The observation of the UNI 11024 requirements is a guarantee for

Especially positive data have been shown related to the trend of sales and payments. The first let to register a good improvement while a favorable reduction of times for the

For this reason, Plastitalia has developed mechanical tools to simplify installation and ensure a better performance of the joint obtained.

Various topics were addressed, including the development and application of the European and Italian regulatory frameworks as well as the role of universities in research applicable to engineering solutions and

For people involved in technical issues, related to Polyethylene (PE) pipelines, there is a clear distinction between Design Basis and Expected Lifetime. As recent studies are demonstrating (e.g.: Polymer Competence

All the Plastitalia S.p.A. fittings are manufactured with high quality polyethylene according to the international standards. Both the branch saddles and the tapping valves are made up of only one piece,without any

The team thriumphed at Le Mans, France, for the second round of the CIK-FIA European Championship in the KZ2 class and the third round of the OKJ class. Bu that’s

In order to ensure this security the European Commission produces documents that (in order of importance) go by the name of Regulation, Directive and Delegated Act. Product Safety is a must is not

The workshop “Weldings of the polyethylene pipes – Regulatory and Pratical aspects” will take place on 7 June from 14:00 pm to 18:00 pm. The purpose of the meeting is

In addition to the issues of district heating, water treatement and no-dig you will have the opportunity to attend the presentations of important accomplishments implemented by the operators. The strong

It was attended by more than 50 technicians among professors, assistants, students, members of water and gas distribution companies and private companies interested in the welding of polyethylene pipes. Great

This accreditation certifies the technical competence of the Plastitalia S.p.A. Laboratory according to ISO 17025. A plus that characterizes the wide range of services offered by Plastitalia S.p.A.!

Standard cooling times have currently been established at an ambient temperature of 23°; Plastfast has certified the new cooling times in a temperature range from -10° to 40°. The Plastfast system, patent pending, consists of: 

During this important event, organized by the Plastic Pipe Conference Association,are presented and discussed items relating to the plastic pipes industry. It also includes a special workshop, in which the

The project designed to support the development of the corporate welfare, is directed to all the employees with the aim to promote and favor the pleasure of reading and at

Thanks to the immediate supply of the polyethylene fittings, it was possible to reactivate the water system, damaged by fires during the last days; especially the flexible pipes, that allow

I Geo Plast, completely developed by the Plastitalia S.p.A. Technological Department, represents a valid answer to the D.L. 27/01/2010 n° 32, that  makes obligatory the respect of the contents  of

The new machine will allow to mold  polyethylene fittings with a bigger diameter respect to that existing, with  a smart design and innovative techniques. TECHNOLOGICAL INNOVATION FOR HIGH PERFORMANCE FITTINGS The President

Plastitalia S.p.A. in fact is able to serve all over the world a customized training service!!!

Click on : https://www.plastitaliaspa.com/azienda/advertising/

The welding was carried out by the IPlast 105 Control Unit, ensuring optimum welding and conditions of total protection.

With the Polytest system, this is the name of the new system for non-destructive testing of electrofusion and butt fusion joints in polyethylene pipes, the integrity of the pipes that

is able to offer customer thanks to flexibility of its design and manufacturing processes. The Company realizes personalized articles to meet every specific demand with any diameter, ray of bending and profile. Download Catalogue

were used to the building of the cooling system of the new Volkswagen plant in Września (Poland). The building site covers an area of 220 hectares, which is equivalent to a

The Otradinsky Sugar Plant CJSC is one of the largest sugar plant in Russia; the plant belongs to the Razgulyai Group, one of the leading agricultural holdings in Russia, that unites three

production and revision of machines for welding and processing thermoplastic materials are certified according to the UNI EN ISO 9001 ( Certified Bureau Veritas n . IT261406 ) .

In this regard, the engineers of the Technical Department and R & D have recently taken part in the PLAST2015, the largest exhibition of international importance of this year for

Today the people working at IPE, provided with a very high degrees of technical experience, developed in the factory as well in the field, it’s able to perform training on

These devices are being confirmed as a point of reference in the electrofusion market  thanks to their technical performances, below any of them: In conformity with standard ISO 12176-2 ,

I Geo Plast 105 is the new DGPS system that connects via radio the control unit (welder) I Plast 105 and transmits the tracking directly to his memory. For each

It was published a few months, by UNI, the new UNI / TS11508 whose purpose is to provide a scheme for the enumeration of the variables of the welding techniques,

Positive results for Plastitalia S.p.A, which in these days is taking part in the event Electramining exhibition in Johannesburg. Good numbers of visitors in the first 4 days of the

Thanks to this collaboration it has been possible developing an important project regarding the use of Plastitalia S.p.A. fittings to completion of the Moscow Raceway, the race track and motorcycle

“FM Global” is the communicative brand of the company, whereas the legal name is “Factory Mutual Insurance Company”. FM mark is synonymous of rigorous validation process and product’s type tests

It is our pleasure to introduce the latest welding unit in the I Plast series – the new I Plast 60 – a small technological miracle, the result of experience